Cutting rubber sheet is a task that requires skill and experience. If cutting is done incorrectly, not only will the appearance and quality of the rubber sheet be affected, but it may also result in damage to the cutting tool or injury. In this article, we’ll cover some tips and dos and don’ts on how to cut thick rubber sheets.

Four step to cutting rubber sheet

preparation tools
Cutting thick rubber sheets requires specialized tools. Generally, a chainsaw or hand saw can be used to cut thick rubber sheets. To ensure safety, it is essential to use a sharp saw blade and proper sawing gear. It is best to wear gloves and goggles when cutting rubber sheets to protect hands and eyes.

Prepare the work site
Before cutting the rubber sheet, it is necessary to prepare a safe and dry work site. If operating indoors, adequate ventilation should be ensured. At the same time, make sure that the work surface is flat to better support the rubber sheet.

mark cutting line
Use a chalk or pencil to mark the lines to cut on the rubber sheet. This can help you cut more accurately and ensure that the final cut rubber sheet is the correct size.

Cutting with a chainsaw or hand saw
Cutting with a chainsaw or hand saw is the most common method. When using a chainsaw, the proper saw blade should be used. Generally, saw blades with wire rope teeth are better suited for cutting rubber sheets. A hand saw, on the other hand, requires more physical effort and time, but allows for better control over the speed and angle of the cut.

When cutting the rubber sheet, you should move the saw blade slowly and make sure that the saw blade is perpendicular to the rubber sheet. At the same time, pay attention to the gap between the saw blade and the rubber plate to ensure that the saw blade will not get stuck or damaged.

SBR Rubber Sheet
SBR Rubber Sheet

Be Safe

When cutting rubber sheets, always pay attention to safety. Be conscious and follow appropriate safety regulations when using a chainsaw or hand saw. At the same time, keep your hands and body away from the saw blade to avoid injury.

In conclusion, cutting thick rubber sheets requires skill and experience, but as long as you pay attention to the above precautions, you can ensure a safe and smooth cutting process.